New Launch CR629 OBD2 Car Scanner ABS SRS Code Reader

LAUNCH CR629 OBD2 Car Scanner is an Enhanced OBD2 scanner designed for Engine, ABS, and SRS monitoring. You can troubleshoot emission-related issues via the full obd2 functions. Built with top-level Actives tests and ABS & SRS diagnoses, this scanner monitors the running condition of ABS and SRS, to better keep your car in peak performance. If you want an easy-to-use and feature-rich car scanner, LAUNCH CR629 equipped with a 3.5-in display is the first tool you need to have.

CR629 supports English, French, German, Spanish, Portuguese, Russian, Japanese, and Italian.

Active Test for ABS and SRS system

CR629 can send information to, and receives information from, vehicle control modules, to test vehicle devices and know if they are running properly.

ABS & SRS system diagnosis

1. Read Version Info – Identify the specific information for the tested control unit, including unit type, version numbers, and other specifications. 2. Read / Clear DTCs – Read the diagnostic trouble codes to know the cause of the warning light and the vehicle faults. After repairs, you can clear the DTCs to turn off the ABS or SRS indicator light. 3. Read Live Data – Retrieve the real-time data stream including coolant temperature, MAP value, TPS value, vehicle speed, mass air flow, ambient temperature, engine rpm, etc. for deep analysis.

Perform Oil Reset after Oil Change

Oil change and reset is necessary, usually about once every 300miles. Changing new, fresh, clean oil for your car is the most direct way to ensure your car runs smoothly and eventually. And using the LAUNCH CR629 to reset oil light is essential for avoiding missing the next oil change.

Recalibrate SAS After an Alignment

It is important that whenever there is a change to the steering system that the steering wheel angle sensor is reset or recalibrated. This hand-held car scanner can do the calibration. So the senor can offer accurate information connecting the steering wheel with the wheels and keeping the normal running of the ESC (Electronic Stability Control) module also your car.

Full OBD2 Functions are Ready for Engine Checking

CR629 car scanner supports Full OBD2 Functions include Read/Erase Codes, Live Data. Freeze Frame Data, I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, Component Test, Vehicle Information Retrieval. 1. Turn the MIL off – After you get the diagnostic trouble codes erased, the check engine light can be off automatically 2. Pass the Smog Test and Check your car’s I/M Readiness status before the emission inspection. Take a well-running vehicle to pass the emission inspection successfully 3. Locate Emission Problems – Full Obd2 functions are significant for figuring out what the root cause is. The diagnostic information is comprehensive, reliable, accurate, and valuable for reference.